Hearthstone deck

List of contents of this article:

• 1,Hearthstone deck How to install the system on the solid-state drive?
• 2, solid Detailed tutorial of state drive installation system
• 3, How to install the system on the solid-state drive?
• 4, solid-state drive installation method detailed explanation

How to install the system on the solid-state drive?

1. Preparation: - Hardware: Buy a solid-state drive suitable for your model. - Software: Prepare an operating system installation media that can be used for installation, such as Windows 10 installation CD or USB drive. Backup data: It is recommended that you back up important data before any operation.

2. When installing, you can format the SSD first with the requirements of the WINDOWS installer, so that the installed SSD will be automatically aligned in 4K;PS: IT IS RECOMMENDED NOT TO PARTITE SSD AND HARD DISK, JUST CREATE A FOLDER MANAGEMENT; DO NOT INSTALL THE GHOST VERSION OF THE WINDOWS SYSTEM, ONLY THE PURE VERSION OF WINDOWS.

3. The installation method is that the interface of the 5-inch SATA solid-state drive is the same as the interface of the mechanical disk. Put the solid-state disk on the hard disk rack (if it is not easy to install, buy a solid-state drive bracket), connect the data cable and power cable, and the solid-state drive can be used. Set up the master-sceept disk.

4. First of all, format the newly purchased solid-state drive in the computer system. It is best not to format quickly, but to format slowly. 2. After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

5. The transmission speed of solid-state drives is much faster than that of ordinary hard disks, and it is generally used as a system disk installation system.

solid-state drive installation system detailed tutorial

method/step 2: USB disk installation system to solid-state drive process And notes 1 SSD solid-state drive is different from mechanical hard disk. SSD must be used to run in AHCI mode.AHCI, the full name of Advanced Host Controller Interface, that is, the advanced host controller interface, is more suitable for the SSD SATA storage device communication protocol than the old "IDE" virtual mode.

Prepare the installation media: First, you need to prepare an installation media containing the operating system, which can be a Windows installation disc or a USB installation disk. Connect the solid-state drive: Connect the solid-state drive to the motherboard of the computer. You can use the SATA cable to connect, or use the M.2 interface to plug it directly into the motherboard.

Paragraph 1: Preparation of tools and materials Before installing the system to the solid-state drive, you need to prepare some tools and materials. First of all, you need a usable solid-state drive to ensure that its capacity meets your needs.Secondly, you need a reliable system installation media, such as a Windows or Linux installation CD or USB drive.

Purchase a solid-state drive and check the capacity and interface of the solid-state drive first. Now there are many interface types of solid-state drives, such as SATA, PCI, etc. After confirming the interface, we install the solid-state drive on the motherboard of the computer and set the solid-state drive as the main hard disk in the BIOS.

How to install the system on the solid-state drive?

There are multiple SATA interfaces on the motherboard. The small quantity is SATA3, and the large quantity is SATA2. Use different colors to express. Look at the picture below. One SATA interface can only plug in one hard disk. The SATA interface of the solid-state drive is all SATA3, and the data cable and power cable are clearly separated.

Install the operating system: - Insert the operating system installation media into the computer and restart the computer. - Follow the instructions on the installation interface to install the operating system. During the installation process, select the solid-state drive as the installation target. Complete the installation: - After the installation is completed, restart the computer and start from the solid-state drive.

Second, before installing the system, 4K alignment of the solid-state drive is required, otherwise it will seriously affect the read and write performance of the solid-state drive.

First of all, format the newly purchased solid-state drive in the computer system. It is best not to format it quickly, but to format it slowly. 2. After formatting, install the system with the one-click restore tool. If there is no accident in the middle, you can be sure that there is no problem with the system installation.

Detailed explanation of solid-state drive installation method

Before installing the solid-state drive, it is necessary to make sure that the SATA interface of the computer motherboard matches the SATA interface of the solid-state drive, which is the basic requirement for installation.

Before installing the solid-state drive, take out all the things distributed with the solid-state drive; the more important things are the solid-state drive body, the solid-state drive mounting bracket and screws, and the data cable.

M.2 solid-state drive installation method. Here, we mainly take the desktop computer as an example. First of all, we need to find the motherboard M.2 slot and screw the copper stud to the third hole "2280 specification". The vast majority of M.2 solid-state drives are 2280 mainstream specifications, as shown in the figure below.