DigiPlus

The DigiPlusengine is blocked (the engine failure caused the vehicle to be paralyzed, which needs to be repaired urgently!) When you are driving on the road, you suddenly feel the sound of the engine mutating, and then the sound suddenly becomes unusually loud. Then, the engine fault indicator light lights up, and then the engine is completely paralyzed. This is a bad situation that every car owner doesn't want to encounter. Once there is a problem with the engine, the vehicle will become unavailable, and the repair cost will be high. But is there any solution to the engine blockage? This article will introduce you to some coping methods. Step 1: To judge the problem, the first task is to confirm the nature of the problem.Sometimes, the engine fault indicator light will light up to tell you what the problem may be, but sometimes, the fault light may not turn on. You can judge the problem by listening to the sound, smelling, and observing the dashboard indicator light. If you have no repair experience, it is recommended that you go to the repair shop or car service center to test the problem. Step 2: Check the engine oil. The common cause of engine failure is the lack of lubricating oil. During the operation of the engine, it needs to be protected by lubricating oil to reduce the wear between the engine parts. If you change or add oil from time to time, there will be problems with the engine. Check whether the engine oil is sufficient and whether it needs to be replaced is a routine step for you to consider when testing problems. Step 3: Check the engine coolant. It is also very important to check the engine coolant and ensure that the water in the water tank is sufficient.If the amount of water in the engine coolant is insufficient, the engine may fail due to overheating. In order to ensure the normal operation of the coolant, you also need to add some coolant to the tank to increase its cooling effect. If you find bubbles when checking the engine coolant, it may mean that there is a leakage problem in the engine and you need to report for repair in time. Step 4: Check the air flow meter of the engine. The airflow sensor is a part that detects the intake flow and temperature of the engine, which is an important device to ensure the normal operation of the engine. If the airflow sensor fails, it may cause the engine to lose power, accelerate or stop running completely. Check whether the airflow sensor is working properly and make sure it is in good condition, which is also an issue to pay attention to when checking engine failure. Step 5: Find a professional repairRecovery service If you follow the above steps to detect and the problem still cannot be solved, then you need to seek professional repair services. When choosing a repair service, you should choose an experienced service agency and a professional institution with technical guarantee. Make sure that each maintenance task is scheduled at regular time and within the budget you have determined. Conclusion: Don't panic when the engine fails. Follow the above steps to check step by step, so that you can quickly find the problem and take a solution. Of course, it is very important to check the car regularly when using it daily. In this way, problems can be detected as early as possible and prevented in advance, so as to solve many worries for car owners. If you are not confident in the maintenance of your car, you'd better go to the car repair shop to seek help from professional and technical personnel!

Contact Us
Phone：020-83484632