Hearthstone Wild Decks

List of the contents of this article:

• 1,Hearthstone Wild Decks< A href='#Two solutions to reinstalling the Windows 10 system can't find the hard disk' title='Reinstalling the Windows10 system can't find the hard disk'>Two solutions to reinstalling the Windows10 system can't find the hard disk< /Li>
• 2.What to do if the computer reinstall system can't find the hard disk
• 3, What to do if the laptop reinstall system can't find the hard disk What to do

Reinstall WinTwo solutions for the hard disk can't be found in the dows10 system

Search for answers. I want to ask a question. Baidu knows the prompt information and knows that the baby can't find the problem_! The problem may have been invalidated.

Change the hard disk mode to AHCI, press F10 to save the changes and enter PE to install the system normally.

Reinstall the Win10 system and can't find the hard disk solution: Method 1: BIOS settings Press the power-on key, and then keep clicking the BIOS boot hotkey. The motherboard button is different. It will generally be displayed under the boot brand logo interface. You can also try FF1ES. The keys C and Del enter the BIOS.

Enter BIOS to change the hard disk format from IDE to AHCI II. The main MBR boot of the hard disk is damaged, and the PE boot disk should be used to repair the boot.

Next, the editor will share with you the reasons and specific solutions that the Windows 10 system cannot recognize the hard disk. After powering up, the hard disk did not respond. When the power was turned on, after starting the computer, it was found that the hard disk did not respond, and the hard disk could not be found in the BIOS.

What to do if the computer reinstallation system can't find the hard disk

1. Search for the answer. I want to ask a question. Baidu knows the prompt information and knows the baby can't find the problem_! The problem may have been invalidated.

2. First of all, eliminate the compatibility problem of the USB disk boot disk itself. You can use the U disk boot disk making tool to remake it, because the deep USB disk is very compatible at present.

3. In the process of installing the system, when prompted that the hard disk cannot be found, you can click the driver load button and select the driver downloaded before loading. Hard disk connection problem: Check whether the data cable and power cable of the hard disk are well connected. You can try to plug in and unplug the data cable and power cable of the hard disk to ensure that the connection is stable.

4. The solution is to change the hard disk mode to IDE. The specific operation method is as follows: power-on --- when a large LENOVO screen appears on the screen --- press F2 to enter the BIOS. After entering the BIOS, you can press the left and right up and down keys to adjust the options, and then select A Dvanced.

5. Step 1: Prepare a GHOST system CD with PE or a U with a systemThe disk starts the disk, press the F12 key immediately after power-on, or set the boot item in the BIOS. After entering PE, run the Diskgunius partition software under PE. First, you can "delete all partitions" on the hard disk.

6. On the desktop screen, right-click the Start menu and select Disk Management. You can find a hard disk without partition. And the solid-state drive has been partitioned, which is a mechanical hard disk without partition. Right-click the blank partition and select a new simple volume. Enter the New Simple Volume Creation Wizard and click Next.

What to do if the laptop reinstallation system can't find the hard disk

1. Search for the answer I want to ask a question. Baidu knows the prompt information and knows that the baby can't find the problem_!The problem may have been invalidated.

2. Hard disk connection problem: Check whether the data cable and power cable of the hard disk are well connected. You can try to plug in and unplug the data cable and power cable of the hard disk to ensure that the connection is stable. If it is a desktop, you can also try to replace the data cable and power cable.

3. Hello, the solution to the problem of not finding the hard disk when installing the system is as follows: (1) You can see the hard disk in the bios, indicating that the hard disk has been recognized by the motherboard. ( 2) If you can't find it in the system, it may be that the hard disk is not partitioned, or the hard disk is a dynamic disk that has not been imported or activated.

4. Press F2 to enter the BIOS to view the Fixed HDD item, change it to SSD, and then save and exit. The hard disk cannot be found due to the low version of the PE system. It is recommended to use a high version of the PE system to reinstall the system.Caused by the failure of the solid-state drive itself, it is recommended to replace the solid-state drive or send it to the repair center for testing.

5. Enter the left and right arrow keys of BIOS to switch to configuration (computer configuration item), find SATA Controller Mode (hard disk mode) to change the hard disk mode to AHCI, and press F10 to save changes to enter PE. The system is often installed.