DigiPlus fair value

List of catalogs in this article:

• 1, How to install the car seat cover
• 2. Installation method of car seat cover (car seat How to install the set)
• 3、What does the car four-piece set include
• 4,DigiPlus fair value Is silicone or beef tendon better for car chassis cover

How to install the car seat cover

1. The installation method of the car seat cover is as follows. The first step is to observe the interior of the car.Structure, that is, what kind of car seat is, and then buy the style pattern you like. If the style is different, there may be leakage or insufficient length.

2. Installation method of car seat cover: connect the chuck to the elastic band, insert the card slot into the seat gap, connect the elastic band to the metal hook, and fix it at the bottom of the seat. First of all, in order to facilitate the installation, move the front seat back, and then directly cover the installed front backrest seat cover down.

3. How to install the car seat cover? Front backrest: first pull out the headrest (generally hold down the headrest movable bolt); cover the backrest cover (see the left, right and front and back) well; the distinction between left and right depends on whether the backrest side pocket is in the middle. If it is on the side of the door, it means that it is installed upside down.

4. The whole seat can be turned up directly, so the installation is quite simple;First, put the seat cover on the seat and adjust the position; pull the rubber band at the front of the rear seat from the bottom of the seat to the back and tie it to the back rubber band; then tighten the rope at the back end; then tie the set seat cover flat, and complete the installation of the rear seat.

5. First of all, move the front seat back to facilitate the installation, and then directly cover the installed front backrest cover down. Then find the chuck inside the seat cover, put it directly into the seat gap, and pull it out from the back of the seat. After pulling it out, smooth the back of the seat cover to make it neat.

Installation method of car seat cover (how to install car seat cover)

Move the seat back and forth to adjust the seat position,Keep the seat position close to the front of the cab near the edge of the steering wheel, so that the seat cover can be installed more easily. ( 2) Install the seat cover. First, put the seat cover on the back of the seat, so that the head of the seat cover is aligned with the head of the seat.

Then the installation is quite simple; 2. Put the seat cover on the seat and adjust the appropriate position; 3. Pull the Velcro at the front of the rear seat from the bottom of the seat to the back through the plastic buckle and then fold it back to stick; then tighten the rope at the back end; then tie the set seat cover flat, and lean on the front The back installation is completed.

[Pacific Automobile Network] Remove the rear seat headrest and cover the seat backrest on the backrest. The upper part of the seat sleeve is fixed by a hook, and the lower part is fixed by the cushion chuck into the gap between the backrest and the cushion. The installation method of the front seat cover is similar to the steps of the rear seat cover.

First, pull out the headrest; cover the backrest cover; put the cloth strip on the front of the backrest cover and the bottom of the backrest cover directly into the backrest and tie the cloth strip at the bottom of the backrest; then insert the head cover and insert it into the backrest; straighten the covered backrest, and complete the front backrest installation.

What does the car four-piece set include

The four-piece set given by buying a car are basically common things, such as: engine guard, ordinary seat cushion, foot mat, film, steering wheel cover, duster, car wash card, etc. Seat cover refers to the cover of the car seat. The seat cover can play a role in beautifying the interior space of the car, protecting the original seat to make it dry and clean, and preventing leather aging.

The four-piece set is seat cover, steering wheel cover, shift lever cover, and foot mat paper.The four-piece set will be put in the car by the technician when he goes to the 4s store for maintenance, which is to prevent the customer's car from getting dirty. Many car enthusiasts don't know that it's because customers can't let customers enter the workshop casually when they go to the 4s store for maintenance.

Clutch four-piece set: clutch pressure plate, clutch disc, separation bearing, separation bearing guide tube. Disposable four-piece set for maintenance protection device: disposable seat cover, disposable foot mat, disposable steering wheel cover, disposable gear lever cover. The four-piece set of car decoration includes: cushion, headrest, waist, and hug.

Clutch four-piece set clutch pressure plate clutch disc separation bearing separation bearing guide tube for maintenance protection device disposable four-piece set disposable seat cover, disposable foot mat, disposable steering wheel cover, disposable shift lever cover car decoration four-piece set including seat cushion head pillow waist.

Friends buy a car and get a four-piece set. The four-piece set of cars generally refers to seat covers, steering wheel covers, shift lever covers, foot mat paper, and can also send reversing radars, driving recorders, car aroma diffusers, etc.

Car chassis sleeve silicone or beef tendon is better

1. The shock-absorbing buffer rubber sleeve is generally made of rubber, mainly because of high rebound and good shock absorption effect! As for the beef tendon on the market, it is basically the yellow kind of rubber (common name).

2. Beef tendon materials and rubber materials have their own advantages and disadvantages, and need to be selected according to the specific purpose. Beef tendon material is a kind of natural rubber with good elasticity, wear resistance, aging resistance and other characteristics, and is widely used in the field of mechanical sealing.

3. After comprehensive comparison, the comprehensive performance of the rubber sole is better. Whether it is wear resistance, anti-slip problem or foot comfort, it is difficult to distinguish between the two, but the rubber sole has the advantage of lightness. However, if it is a high-temperature working environment, the beef tendon bottom is more resistant to high temperature, and it is more appropriate to choose the beef tendon bottom.